HPE Aruba Networking 610 Series Campus Access Points are designed to take advantage of the 6 GHz band and achieve a combined maximum 3.6 Gbps data rate for higher throughput and faster speeds indoors. Adding support for the 6 GHz band increases capacity by up to 1200 MHz1 with more 80/160 MHz channels to support growing demands due to bandwidth-hungry video, growth in client and IoT devices, and expanded use of the cloud. The compact and cost-effective Aruba 610 Series features dual software-programable radios that can be tuned to any two of the three Wi-Fi 6E bands: 2.4 GHz, 5 GHz, and 6 GHz. Full tri-band coverage is available in a multi-AP deployment. Built-in GPS receivers and fine time measurement enable the HPE Aruba Networking 610 Series Campus Access Points to automatically locate themselves and serve as reference points for accurate indoor location measurements.
| TechnicalSpecifications |
|---|
| Ports |
E0, E1: Two Ethernet wired network ports (RJ-45)
DC power interface
USB 2.0 host interface (Type A connector)
Kensington security slot |
|---|
| Mounting |
A mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the mount kits (sold separately)
see the HPE Aruba Networking 610 Series Campus Access Points Ordering Guide for details. |
|---|
| Input voltage |
POE-PD: 48Vdc, DC power interface: 12Vdc |
|---|
| Power consumption |
DC powered: 12.5W/18.2W POE powered: 14.7W/20.9W This assumes that up to 5W is supplied to the attached USB device. |
|---|
| Certifications |
UL2043 plenum rating
Wi-Fi Alliance: Wi-Fi CERTIFIED a, b, g, n, ac, Wi-Fi CERTIFIED 6E (ax, 6GHz), WPA, WPA2 and WPA3 – Enterprise with CNSA option, Personal (SAE), Enhanced Open (OWE), WMM, WMM-PS, Wi-Fi Vantage, W-Fi Agile Multiband, Wi-Fi Location, Passpoint (release 2)
Bluetooth SIG
Ethernet Alliance (POE, PD device, class 5) |
|---|
| Regulatory |
FCC/ISED
CE Marked
RED Directive 2014/53/EU
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
UL/IEC/EN 60950
IEC/EN 62368-1
EN 60601-1-1, EN60601-1-2 |
|---|
| Wi-Fi antenna |
AP-615: Integrated downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 4.6dBi in 2.4GHz, 7.0dBi in 5GHz and 6.3dBi in 6GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 to 40 degrees. Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.2dBi in 2.4GHz, 4.8dBi in 5GHz and 4.9dBi in 6GHz. |
|---|
| Radio coverage |
Indoor, tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2x2 MIMO |
|---|
| Product dimensions (metric) |
5.1 x 20.1 x 18.3 x cm |
|---|
| Weight |
0.72 kg |
|---|
|
